Oklahoma State University - Tulsa
Oklahoma State University - Tulsa

News Alert:

Ranji Vaidyanathan, Ph.D., P.E.

Raj N. Singh, Sc.D.

Varnadow Professor of Materials Science and Engineering
Graduate Program Coordinator
School of Materials Science and Engineering
Courtesy appointment in School of Chemical Engineering

Helmerich Research Center
Oklahoma State University
700 North Greenwood Avenue, HRC-200
Tulsa, OK 74106-0700

Office Phone: 918-594-8645
Cell Phone: 405-338-8999
Fax: 918-594-8628
vaidyan@okstate.edu or tulmsegr@okstate.edu

Biography and CV

Dr. Ranji Vaidyanathan is presently the Varnadow Professor of Materials Science and Engineering at the Helmerich Research Center at OSU Tulsa. He directs the Next Generation Materials Laboratory at the Helmerich Research Center at OSU Tulsa. He is a Riata Faculty Fellow with the Riata Center for Entrepreneurship at the School of Entrepreneurship, Spears School of Business at OSU. He was previously the Director of the New Product Development Center (NPDC) and the Inventors Assistance Service (IAS) at Oklahoma State University for linking the innovative ideas and capabilities of small manufacturers and inventors with the knowledge and multi-disciplinary expertise of the land grant university faculty, in order to develop and commercialize economically competitive new products that strengthen rural economies, create new and enhanced jobs, capital investment and an increased tax base. At Oklahoma State University, Dr. Vaidyanathan works collaboratively with faculty members from various disciplines and colleges to develop products and solutions for Oklahoma small manufacturers. As the Varnadow Professor, Dr. Vaidyanathan works with the Helmerich Research Center (HRC) faculty to develop a major research and technology transfer thrust in composite materials. As a Riata Faculty Fellow in Entrepreneurship, Dr. Vaidyanathan works with small businesses and start-up companies to advance the technologies developed at HRC into enterprises and sustainable companies. Dr. Vaidyanathan also has a joint appointment with the School of Chemical Engineering at Oklahoma State University.

Prior to coming to Oklahoma State, Dr. Vaidyanathan was the director for advanced polymer composites at Advanced Ceramics Research (ACR) in Tucson, AZ for 9 years. While at ACR, he worked as the PI on 23 Phase I and 11 Phase II Small Business Innovative Research (SBIR) and Small Business Technology Transfer (STTR) projects, funded by the Navy, National Science Foundation, NASA, USDA and Air Force. Ranji has a total of eighteen patents including sixteen U. S. patents. He has developed six different products from concept stage to commercial stage including Aquacore™ and Aquacast™ water-soluble tooling materials commercially being sold to Airbus, Eurocopter, Lockheed and Boeing at a level of $2 million per year. His previous responsibilities also included post-doctoral positions at Rutgers University, Johns Hopkins University and North Carolina A&T State University.

top of page top


Professional Preparation

State of Ohio
2005
Ceramic Engineering P.E.
North Carolina State University
Raleigh, NC; 1992
Materials Science and Engineering Ph.D
North Carolina A&T State University
Greensboro, NC; 1988
Mechanical Engineering M.S.M.E 
Banaras Hindu University
India; 1980
Metallurgical Engineering B.Tech

top of page top

Professional Experience

Varnadow Professor of Materials Science and Engineering
Helmerich Research Center, Oklahoma State University, Tulsa, OK, July 2011 – present

Carl G. and Gladys L. Herrington Professor in Advanced Materials
Helmerich Research Center, Oklahoma State University, Tulsa, OK, October 2009 – June 2011

Research Professor and Director
New Product Development Center (NPDC) and Inventors Assistance Service (IAS), Oklahoma State University, Stillwater, OK, August 2007 – March 2011

Adjunct Associate Professor
Department of Aerospace and Mechanical Engg., Univ. of Arizona, Tucson, AZ, August 2000 – August 2007

Director, Composite Materials July 2004 – July 2007
Manager, Advanced Materials July 2000 – July 2004
Senior Research Scientist July 1998 – July 2000
Advanced Ceramics Research (ACR), Inc., Tucson, AZ

Senior Research Scientist
Materials and Electrochemical Research (MER) Corporation, Tucson, AZ, August 1996 – July 1998

Post-doctoral Research Fellow
Dept. of Mech. Engg., Johns Hopkins University, Baltimore, MD, December 1995 – July 1996

Research Associate
Center for Ceramic Research, Rutgers University, Piscataway, NJ, January 1994 - November 1995

Research Associate
Dept. of Mech. Engg., North Carolina A&T State University, NC, June 1992 - December 1993

 
top of page
top

Courses taught by Dr. Ranji Vaidyanathan

  • ENSC 3313 Materials Science (Junior level undergraduate) – Fall semesters
  • MSE 5043 Advanced Materials Characterization (Graduate) – Fall semesters
  • MSE 5123 Advanced Composite Processing (Graduate) – Spring semesters
  • MAE 4333 Mechanical Metallurgy (Junior level undergraduate) – Spring semesters

top of page top

 

OSU-Tulsa on Facebook OSU-Tulsa on Twitter OSU-Tulsa on Foursquare OSU-Tulsa on You Tube